- An AllGood-Group Company
AllGood AG-DK-50G Class I Modular Surge Protective Device SPD
AllGood AG-DK-50G Class I Modular Surge Protective Device SPD is designed according to IEC standards. It conforms with the standard requirement of low-voltage surge protective device--Part 1: product performance requirement and testing method of low-voltage power distribution system. It is designed as module with 35mm DIN-Rail Mounting. It takes the advantage good sealing. Every lightning protection module adopts temperature control technology and built-in over current protective circuit. When the lightning protection module is degradation, it can release automatically, which can avoid fire danger. This lightning protection module has build-in remote alarm connector for remote monitoring. The protection lightning mode is L-PE, N-PE.
Class I SPD is suitable for the low voltage main power distribution cabinet/box of buildings between the lightning protection zone LPZ0 and LPZ1, to protect all kinds of equipment in the three (single) phase AC power supply and system.
| SPD Type : | One-port SPD |
| Applicable Power Supply System : | TT,TN,IT |
| Maximum Continuous Operating Voltage Uc : | 320V AC |
| Nominal Discharge Current (8/20µs) : | 50kA |
| Impulse Currents Iimp(10/350µs) : | 25kA |
| Voltage Protection Level Up : | ≤2.0kV |
| Short circuit current tolerance : | 300A |
| Respond Time tA : | 100ns |
| Remote Alarm Function : | Optional |
| Maximum Connection Wire Range : | BVR 35mm2 Strand Wire |
| Method of Installation : | 35mm Din Rail Mounting |
| Material of Shell : | PC |
| Flame Retardant Rating of Outer Shell : | UL94-V0 |
| Protection Level of Outer Shell : | IP20 |
| Working Temperature : | –25~＋70℃ |
| Relative Humidity : | ≦95%RH |
| Product Model | Specification | Protection Mode | Install Location | Dimension |
|---|---|---|---|---|
| AG-DK-50G 4P | 4P | L-PE, N-PE(4P) | Low-voltage Three Phases Power Distribution Cabinet | 144*95*65mm |
| AG-DK-50G 3P | 4P | L-PE, N-PE(3P) | Low-voltage Three Phases Power Distribution Cabinet | 108*95*65mm |
| AG-DK-50G 2P | 2P | L-PE, N-PE (2P) | Low-voltage single Phase Power Distribution Cabinet | 76*95*65mm |
| Product Model | Specification | Protection Mode | Install Location | Dimension |
|---|---|---|---|---|
| AG-DK-50G 4P | 4P | L-PE, N-PE(4P) | Low-voltage Three Phases Power Distribution Cabinet | 144*95*65mm |
| AG-DK-50G 3P | 4P | L-PE, N-PE(3P) | Low-voltage Three Phases Power Distribution Cabinet | 108*95*65mm |
| AG-DK-50G 2P | 2P | L-PE, N-PE (2P) | Low-voltage single Phase Power Distribution Cabinet | 76*95*65mm |
